I have 3COM 4500G 48 port.
What i'm going to do is creating 3 VLAN on single 3COM 4500G and setup vlan routing between those vlan.
So far this is what I already done :
1. Assign IP : 192.168.10.43 for interface VLAN 1
2. Create VLAN 2 & 3, VLAN 1 is default VLAN so no need to create.
3. Port #1 - #24 are assign to VLAN 1 (default) --> Planned for network 192.168.10.0/24
4. Port #25 - #36 are assign to VLAN 2 --> Planned for network 192.168.11.0/24
5. Port #37 - #48 are assign to VLAN 3 --> Planned for network 192.168.12.0/24
6. Add static routing on switch : 192.168.11.0 mask 255.255.255.0 to gateway 192.168.11.43
7. Add static routing on switch : 192.168.12.0 mask 255.255.255.0 to gateway 192.168.12.43
8. Assign IP : 192.168.11.43 to interface VLAN 2
9. Assign IP : 192.168.12.43 to interface VLAN 3
10. All port was set to ACCESS port
Now, on testing part....
PC A on VLAN 1 with IP : 192.168.10.5 gateway 192.168.10.43
PC B on VLAN 2 with IP : 192.168.11.5 gateway 192.168.11.43
PC C on VLAN 3 with IP : 192.168.12.5 gateway 192.168.12.43
PC A can ping to 192.168.11.43 but can't reach PC B
PC B can ping to 192.168.10.43 but also can't reach PC A
PC C has the same condition.
I see my routing is correct and the packet also can cross between vlan, but can;t reach designate PC.
Can someone point me a clue for this problem ?