thanks for pointing it out, here it is.
https://community.arubanetworks.com/community-home/digestviewer/viewthread?GroupId=13&MessageKey=3f3e4689-4dee-497f-aed5-6e6d5cf995da
------------------------------
Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba.
------------------------------
Original Message:
Sent: May 23, 2022 07:52 AM
From: Blair Rushlow
Subject: aruba 303H can't figure how to add to existing velop mesh wifi setup
Thanks for the reply ariyap but I don't see any attachment or tech note link that I can follow.
Am I missing something?
------------------------------
Blair Rushlow
Original Message:
Sent: May 21, 2022 03:53 AM
From: Ariya Parsamanesh
Subject: aruba 303H can't figure how to add to existing velop mesh wifi setup
you can go through this tech note which is about wireless mesh setup with instant APs.
------------------------------
Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba.
Original Message:
Sent: May 14, 2022 02:13 PM
From: Blair Rushlow
Subject: aruba 303H can't figure how to add to existing velop mesh wifi setup
Hi, I have a Linksys 1920 setup in bridge mode so I can use it for whole house VPN.
It is connected to a linksys velops that handle my wifi. Works OK but I have issues in some rooms and
can't get a signal to my detached garage or outdoor cameras that is stable.
I purchased 2 aruba 303H APs in the hopes that it would be easy to connect as wifi extenders to push my velop signal
through a window to the outside world so to speak and if I leave one in the house and one in the garage i'd want it to
make the house signal a bit stronger.
I cannot get it to connect as easy as they say. It keeps wanting to leave the aruba as a separate network SSID.
I can use my other SSID but still see the aruba as SETMEUP when I do a network search and when I think I have it connected it says it
has no internet connection.
I can see that when I log into it it has a IP address from my router.
Is there an easy video somewhere I can follow for this? I'm not that network savvy with all these terms and don't really understand
DHCP and the like.
I'd even be happy if I could just use the 2 aruba's without the velops if they would work as i need them to.
Thanks.
------------------------------
Blair Rushlow
------------------------------