I would recommend to use iperf in order to test physical network connectivityZ
There might be limits in the passive part such as, patch cable, patch pannels, etc.
---------------------------------
Shpat | MVP 2021 | ACEP | ACMP | ACCP | ACDP |
---------------------------------
Original Message:
Sent: Jan 09, 2022
From: muhammad nabeel
Subject: RE: Some AP speed cant go above 100
We are using speedtest.net
I will check the command today but same client is getting correct speed from other APs in that location.
Original Message:
Sent: 1/9/2022 5:04:00 PM
From: cjoseph
Subject: RE: Some AP speed cant go above 100
What are you using to test speed?
Check the client rx and tx by running "show ap debug client-table ap-name <name of ap>" on the commandline to ensure they are not negotiating lower transmit rates on that AP.
------------------------------
Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
------------------------------
Original Message:
Sent: Jan 09, 2022 02:23 PM
From: muhammad nabeel
Subject: Some AP speed cant go above 100
Hi everyone. We are facing an issue. Some APs (3/10) in 1 location don't give speed above 100.mbps. wired speed is ok. Clients are connecting at 5ghz. What can be the issue. Cables have been tested, replaced and APs have also been replaced.
------------------------------
muhammad nabeel
------------------------------