In such a situation most customers will consult an Aruba partner who is trained in doing a proper design, sizing, configuration and testing to get to a reliable solution. Most people go through 10 days of training (ACMA, ACMP) to learn and get to the point that they can start deploying controllers on their own. What you ask is in those trainings; and many other things that are critical to build a secure and performing wireless network.
If you are trained, and just need to understand how to setup a backup controller, you may ask Aruba support to assist you.
------------------------------
Herman Robers
------------------------
If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check
https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
------------------------------
Original Message:
Sent: May 03, 2022 04:55 AM
From: Muhammad Altaf Hussain
Subject: Aruba 7030 Controller Configuration help
i am configuring 2 Aruba 7030 wireless controllers in the new network need support how to configure them one controller master and the other as a standby.
------------------------------
Muhammad Altaf Hussain
------------------------------