Hey, guys,I have a question about Aruba controller NAT .
I use Aruba 7010 as the gateway.
VLAN 4000 is used as WAN interface, and the IP is static IP 221.2.2.2 .
VLAN 10 is an office VLAN, and IP NAT inside is configured , ip address 192.168.1.1
We have a web server in the office VLAN with an IP of 192.168.1.54. I configured port mapping for it and used port 8282 .
Now, we access my internal server in any Internet access
http://221.2.2.2:8282.However, I cannot access my server directly through 221.2.2.2 in my internal network , it doesn't work anymore. Only internal address 192.168.1.54:8080 can be used .
I think it's because I haven't configured source NAT correctly .
Please give me some help , thanks !
------------------------------
eddy zhou
whhcit.com
Weihai . SD . China
+86 13061120222
------------------------------