I am trying to use an AT&T 340U usb card to connect by RAP3. It never even appears to dial, status on card just read "Ready to connect". I have access to the web page for the RAP3 and can ssh to it. The RAP3 works fine with broadband plugged in to E0 but I want to verify I can use a usb aircard also.
What I've tried:
Resetting the RAP3 and just letting it auto detect - which looks correct.
Restarting with E0 disconnected.
Moving 3G/4G to the top of Uplink Priority List.
Manually setting: USB dev: 0x11999051 and USB type: netgear-gobi; or sierra-evdo or sierra-gsm or sierra gobi
Testing 4G card from laptop and updating 340U firmware to 01.13.12.14
Any help would be appreciated. Thanks.