hi all,
i'm testing out IAP-VPN from AP-515 to 7010 controller running 8.6 in standalone mode.
I've setup IAP with Aruba GRE and despite the manual suggesting that the GRE config on the controller end is automatic (apart from whitelisting and VPN pool) i'm finding this to not be the case.
It seems the only way to get traffic to flow once the tunnel is up is to manually define a GRE Tunnel on the 7010 to the IAP IP Address.
Secondly to that, i've read that when turn off the Per AP tunneling option the tunnel should be sourced from the VC IP Address. Through testing i've found that the tunnel still originates from the physical IP address of the VC and not the actual "VC IP address" which seems to be in conflict with the guides.
anybody able to shed some light on this?
Scott
------------------------------
Scott Doorey
------------------------------