Check page 19 of the
ArubaOS Hardening Guide. The firewall-cp is probably what you are looking for, if these people are in a specific IP subnet.
Otherwise, if the admins are in the same IP subnet (and don't have static IP) you can configure the role for these managers to allow access, and block in all other roles.
------------------------------
Herman Robers
------------------------
If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check
https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
------------------------------
Original Message:
Sent: Dec 17, 2021 05:25 AM
From: sanjib behera
Subject: Need help on configuration for access restriction to ssh and https on aruba WLC
Hi everyone i am new to this aruba WLC environment.
So can anyone please help me out on configuration.
There is the requirement of only the limited persons from network management team can access the WLC using HTTPS or SSH only and other users shouldn't be able to access the controller.
------------------------------
sanjib behera
------------------------------