Controllerless Networks

 View Only
last person joined: yesterday 

Instant Mode - the controllerless Wi-Fi solution that's easy to set up, is loaded with security and smarts, and won't break your budget
Back to discussions
Expand all | Collapse all

Country Code issue

This thread has been viewed 24 times

  • 1.  Country Code issue

    Posted Feb 21, 2021 05:58 PM
    Hi, 
    I have a AP 325 that I converted to an IAP-325. In the cli when I set the country code to US, I get 'Error: "US" is not a valid country code for this AP'
    but the AP is definitely a US model. Is there a reason behind this that could have to do with a mistake during the conversion.


    ------------------------------
    Jack Sommers
    ------------------------------


  • 2.  RE: Country Code issue

    EMPLOYEE
    Posted Feb 21, 2021 06:50 PM
    How did you convert the AP to IAP?

    ------------------------------
    Onno Harms
    ------------------------------

    Original Message


  • 3.  RE: Country Code issue

    Posted Feb 21, 2021 07:03 PM
    This, AP to IAP
    I used the method on the top comment but switched RW to US for the country code. I seems that I needed to hash (US- Serial Number) and add that too but i didn't. Is it possible to reflash ap firmware without a controller?

    ------------------------------
    Jack Sommers
    ------------------------------

    Original Message


  • 4.  RE: Country Code issue

    EMPLOYEE
    Posted Feb 21, 2021 10:44 PM
    Hmm, wasn't aware that this could be done without a controller. Based on your experience, I'm still not convinced that it can be done. That was certainly never Aruba's intention.

    ------------------------------
    Onno Harms
    ------------------------------

    Original Message