Hmm, I have the exact same setup running at home, and am connected over 6GHz right now.
I'm using a -US AP variant and US country code. Which CC are you using?
The Intel driver may be looking for a US CC. I shared a tool with Sietze that can be used to check that.
It appears that the immaturity of the Intel driver for 6GHz support, and limited regulatory support for the band (the only countries in Europe for which we currently enable 6GHz in the DRT are UK and Germany AFAIK) are causing some issues.
------------------------------
Onno Harms
------------------------------
Original Message:
Sent: Oct 07, 2021 03:00 AM
From: Joel Stouwdam
Subject: AP635 testing 6Ghz capabilities on 8.9.0.0
Hi Onno,
Did try many driver version. running 22.45.1.1 at the moment and did check the registry for 6Ghzband in windows.
Sietze still has no luck (run in to him Yesterday)
------------------------------
Joel Stouwdam
Original Message:
Sent: Oct 07, 2021 02:53 AM
From: Onno Harms
Subject: AP635 testing 6Ghz capabilities on 8.9.0.0
Intel driver version? I found that anything over 22.45.1.1 does not see 6GHz channels for some reason.
You may need a registry change as well.
I shared some details with Sietze.
------------------------------
Onno Harms
Original Message:
Sent: Oct 07, 2021 02:45 AM
From: Joel Stouwdam
Subject: AP635 testing 6Ghz capabilities on 8.9.0.0
Running on DRT version 81497.
AP is listing 6Ghz allowed channels .. looks fine.
------------------------------
Joel Stouwdam
Original Message:
Sent: Oct 07, 2021 02:39 AM
From: Sietze Reitsma
Subject: AP635 testing 6Ghz capabilities on 8.9.0.0
Hi Joel,
can you check DRT 80922 or higher is running?
Original Message:
Sent: Oct 06, 2021 11:03 AM
From: Joel Stouwdam
Subject: AP635 testing 6Ghz capabilities on 8.9.0.0
Hi,
Testing an AP635 with firmware 8.9.0.0 at the moment. 2,4ghz and 5Ghz are fine.. cannot get my Intel AX210 client to connect to 6Ghz.
-did enable 6Ghz radio at advanced SSID settings
-tested on multiple country codes (AP shows available 6ghz channels)
-tested on a Windows 10 and Windows 11 client with multiple Intel drivers. Made sure that windows knows it can use 6Ghz Band (regedit)
-tested with 3 AX210 adapters
Any suggestions?
Greetings,
------------------------------
Joël Stouwdam
------------------------------