I recently changed over from Comware switches to Aruba 2930 switches for our IDF's connected back to the Aruba 8320 core. We have DHCP setup in the core for our Aruba 305 IAP's. After the change, all of the IAP's received an IP address except for one. It is trying to use the same IP address as another IAP. How do I force it to go out and check for a new IP address when it will not grab one at all?
Or can I force the conflicting one to grab a new IP? That one is currently on the network.
They are managed by Airwave, and I tried to set a static IP in Airwave for the conflicting IAP, but Airwave will not apply the config to that IAP.
------------------------------
Elise Herrera
------------------------------