Hello,
I recently purchased three IAP-324s to add to my existing network. I have set up well over 100 IAPs of various models over the past few years. With this model, all I can do is ping the IP address. I am not able to get to the GUI to configure it and the CLI is not working either. The LED blinks green and never reaches the ready state indicated by a solid green LED, as per the manual. This is happening with all three of the devices.
What am I missing here? I have gone over it several times. I have reset the APs, checked all the network settings, etc. I have tried connecting to different ports and different switches. Nothing has worked. Surely they can't all be faulty, or can they?
Many thanks for your help!
------------------------------
Russell Peeples
------------------------------