Hi Haythem,
Note that it's not supported in a production environment.
Second, be carefull using the right country code because it's not interchangeable, you can write it only once!
Third, its not working on all model access points ;)
------------------------------
Marcel Koedijk | MVP Guru 2021 | ACMP | ACCP | Ekahau ECSE | Not an HPE Employee | Opionions are my own
------------------------------
Original Message:
Sent: Mar 08, 2021 10:05 AM
From: Haythem Kefi
Subject: Convert Controller Based AP to IAP
Requirements and suggestions
tftp or scp server
- Conversion should be proceeded one ap a time
Convert from a server using tftp, ftp or scp and copy the instant image version in the appropriate folder
Tasks
- Check ap is up from md perspective
[MDC]# show ap database long status up
[MDC]#ap convert add ap-name <ap-name>
- Check that the ap was added
[MDC] #show ap convert-status
- Convert:
[MDC] #ap convert active specific-aps server tftp <server-ip> <image-file>
- Check that the image file was downloaded successfully:
[MDC] #show ap convert-download-log
- Check conversion status:
[MDC] #show ap convert-status
- Job is done ! AP will reboot with instant AP image
------------------------------
Haythem Kefi
Senior W. Network Architect
CPU Conseil
Quebec QC
14186816974
------------------------------