Controllerless Networks

 View Only
last person joined: yesterday 

Aruba Instant Wi-Fi: Meet the controllerless Wi-Fi solution that's easy to set-up, is loaded with security and smarts, and won't break your budget.
Expand all | Collapse all

WPA3 with AP505

This thread has been viewed 8 times
  • 1.  WPA3 with AP505

    Posted Apr 23, 2022 01:35 PM

    Hi,

    We tried to enable WPA3 EAP-TLS on SSID. However, we found that clients shows that they are in WPA2 in WPA3-128 mode.when choosing CCNA, there seems to be no packet can be transmitted(not Even DHCP).

    We then found out the WPA3 description in documentations does not includes AP500 but even older 300 series support them and WPA3 is stated to be supported in 505 data sheet. Is it 505 does not support yet or it's a occasional case? Thank you



    ------------------------------
    Leo Kan
    ------------------------------


  • 2.  RE: WPA3 with AP505

    MVP EXPERT
    Posted Apr 25, 2022 05:55 PM
    WPA3 is fully supported and certified on the AP-500 series according the datasheets.
    https://www.arubanetworks.com/assets/ds/DS_AP500Series.pdf

    Make sure your controller firmware and endpoint client drivers are up-to-date.

    Note you can run WPA-3 in transition mode (backwards compatible mode) or WPA-3 only (more secure).

    ------------------------------
    Marcel Koedijk | MVP Expert 2022 | ACEP | ACMP | ACCP | ACDP | Ekahau ECSE | Not an HPE Employee | Opinions are my own
    ------------------------------