We have 505H using firmware Version 8.8.0.0 and Version 8.7.1.4
The same happens... every 10 seconds each AP throws 5 messages:
AP:W-NCB-R429-AP-1 <169.254.35.91 20:4C:03:D6:AD:97> meshd[7901]: meshd_anulmesh_link_table_check: open anulmesh link table succeed
AP:XX-YY-ZZ-AP-1 <169.254.35.91 20:4C:03:D6:AD:97> meshd[7901]: meshd_anulmesh_link_table_check: LINE 1: < 0: 20:4c:03:d6:ad:97 20:4c:03:d6:ad:97 Bridge Internal br0 1376844729 0 >
AP:XX-YY-ZZ-AP-1 <169.254.35.91 20:4C:03:D6:AD:97> meshd[7901]: meshd_anulmesh_link_table_check: LINE 2 no peer MAC
AP:XX-YY-ZZ-AP-1 <169.254.35.91 20:4C:03:D6:AD:97> meshd[7901]: meshd_anulmesh_link_table_check: LINE 1 link mode<Bridge> is not WIFI
AP:XX-YY-ZZ-AP-1 <169.254.35.91 20:4C:03:D6:AD:97> meshd[7901]
: meshd_anulmesh_link_table_check: LINE 2: < >
It can not be filtered by the syslog-level commands...
We have tried with several combinations but no success...
This is one test... but messages still appear.
Syslog Level :warn
Logging Level
-------------
Facility Level
-------- -----
ap-debug emergency
network emergency
security emergency
system emergency
user emergency
user-debug emergency
wireless emergency
------------------------------
Fernando Iñiguez
------------------------------
Original Message:
Sent: Jun 10, 2021 10:10 AM
From: Jon Koelker
Subject: Issue with 8.7.1.3?
Just upgraded IAP-305s, -315s, -365s and -577/575s to 8.7.1.3. Shortly after the upgrade, all the IAPs began sending thousands of alert messages to AirWave, all containing this sort of message:
meshd[6290]: meshd_anulmesh_link_table_check: LINE 2 no
peer MAC
meshd[6290]: meshd_anulmesh_link_table_check: LINE 1
link mode<Bridge> is not WIFI
meshd[6290]: meshd_anulmesh_link_table_check: open
anulmesh link table succeed
In two clusters containing a total of 88 IAPs, AirWave very quickly received over 16,000 of these messages. Any idea what would cause this? We upgraded to 8.7.1.3 from 8.6.0.6
------------------------------
Jon Koelker
------------------------------