this will only work
(1) If the AP is a remote AP and
(2) The remote AP setting for the Virtual AP is "always"
It is preferred to deploy an instant AP to those locations.
------------------------------
Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
------------------------------
Original Message:
Sent: Nov 30, 2021 08:22 AM
From: mohamed gamal
Subject: Access point work as bridge after controller down
dears,
Let me clarifity
We have MM-MC setup
MM into HQ
MC on the Branch
APs connect to Branch Controller Tunnel mode /CAP
The request is
When the branch went down Branch AP will work as bridge mode ,
So the question is :-
- How to achieve this by configuration
- If MC became UP ,Is AP terminated again onto it automatically or need any action manually ?
------------------------------
mohamed gamal
------------------------------