Community Feedback

 View Only
last person joined: 18 hours ago 

How is the community doing? Do you have any questions or feedback related for the Airheads Community team? This is the place to let us know.
Expand all | Collapse all

S2500-48P-4x10G - Four Gb Ports

This thread has been viewed 7 times
  • 1.  S2500-48P-4x10G - Four Gb Ports

    Posted Sep 02, 2021 12:18 PM


    First time I have purchased Aruba.  Worked with them in various customer environments but..  on a budget trying to support POC/Demo lab.  

    I needed 4 x 10Gb (I have three hosts each with 10Gb NIC for vSAN block), VLANs, Basic VLAN routing,  24 ports, and something to play with ansible to configure with IaC as I am supporting more of those requests.

    I know it is an older switch but it is budget...

    What I did not realize is .. it has 4 x 10Gb  but two noted as stacking ports.  Two (0/1/0 and 0/1/1) are standard 10Gb but I do not see means to change mode on the "stacking" ports to be standard 10Gb.

    Hoping their is option / command I am missing.

    ------------------------------
    Jeremey Wise
    ------------------------------


  • 2.  RE: S2500-48P-4x10G - Four Gb Ports

    EMPLOYEE
    Posted Sep 02, 2021 01:43 PM
    Yes, you missed a command ;-)

    Here is how to remove stacking from ports on MAS switches (like S2500), and you can use all 4 ports as normal 10G SFP+ ports.

    ------------------------------
    Herman Robers
    ------------------------
    If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.

    In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
    ------------------------------



  • 3.  RE: S2500-48P-4x10G - Four Gb Ports

    Posted Sep 02, 2021 06:43 PM
    That worked.   Just did not get the correct google.  I also looked in the admin manual.. just not well enough it would seem.

    (sw0) #show   stacking interface brief

     

    Interface      Admin      Operational    Link       Hardware

    ---------      -----      -----------    ----       --------

    stack1/2       Enable     Down           Down       Present

    stack1/3       Enable     Down           Down       Present

    (sw0) #delete stacking interface stack 1/2

    (sw0) #delete stacking interface stack 1/3

    (sw0) #show interface brief | include GE0/1/

    GE0/1/0    Enable  Down  Down           N/A

    GE0/1/1    Enable  Down  Down           N/A

    GE0/1/2    Enable  Down  Down           N/A

    GE0/1/3    Enable  Down  Down           N/A



    ------------------------------
    Jeremey Wise
    ------------------------------