Community Feedback

 View Only
last person joined: 2 days ago 

How is the community doing? Do you have any questions or feedback related for the Airheads Community team? This is the place to let us know.
Expand all | Collapse all

Can't ping devices inside one access point and one SSID

This thread has been viewed 11 times
  • 1.  Can't ping devices inside one access point and one SSID

    Posted May 26, 2021 07:04 PM

    Hello to all! 

    I have two access points, AP-303. In the master access point, two networks with network-based VLANs are configured. Access points with the latest software and DRT. When I tried to ping computer in same SSID and same access point result of ping is host is unreachable, but when I try to ping computer in same SSID but another access point all works fine. What can it be?
    Thanks.



    ------------------------------
    Yukhym Shulha
    ------------------------------


  • 2.  RE: Can't ping devices inside one access point and one SSID

    Posted May 27, 2021 05:55 AM
    Hi,

    the firewall of the PC ?

    or deny inter traffic on the SSID ?

    ------------------------------
    PowerArubaSW : Powershell Module to use Aruba Switch API for Vlan, VlanPorts, LACP, LLDP...

    PowerArubaCP: Powershell Module to use ClearPass API (create NAD, Guest...)

    PowerArubaCX: Powershell Module to use ArubaCX API (get interface/vlan/ports info)..

    ACEP / ACMX #107 / ACDX #1281
    ------------------------------



  • 3.  RE: Can't ping devices inside one access point and one SSID

    Posted May 27, 2021 08:36 AM
    Deny inter traffic on the SSID is off

    ------------------------------
    Yukhym Shulha
    ------------------------------



  • 4.  RE: Can't ping devices inside one access point and one SSID

    Posted Jun 01, 2021 09:28 AM
    Strange...

    no ACL on the IAP ?

    ------------------------------
    PowerArubaSW : Powershell Module to use Aruba Switch API for Vlan, VlanPorts, LACP, LLDP...

    PowerArubaCP: Powershell Module to use ClearPass API (create NAD, Guest...)

    PowerArubaCX: Powershell Module to use ArubaCX API (get interface/vlan/ports info)..

    ACEP / ACMX #107 / ACDX #1281
    ------------------------------