Thierry,
It may work better to post such type of question in the
Location Services forum, instead of the Community Feedback. I would think the ws-endpoint is what is named in the documentation that you refer to:
https://tags-eu.meridianapps.com/api/v1beta1/streams/ingestion.start
Unsure which command doesn't work? You did not mention that. If there are no quick replies, opening a TAC case probably is best, so they also can have the documentation fixed where needed.------------------------------
Herman Robers
------------------------
If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check
https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
------------------------------
Original Message:
Sent: Oct 27, 2021 04:56 AM
From: Thierry Lubbers
Subject: Asset tracking to meridian and controller firmware 8.7.1.5 or higher
Hello,
e have a meridian asset trackng solution and it worked.
We updated from to 8.7.1.3 to 8.7.1.5 and in this release the working is changed for IOT configuration.
The guide below is not correct anymore.
https://docs.meridianapps.com/hc/en-us/articles/360049798094-ArubaOS-8-7-x-Meridian-Beacons-Management-and-Asset-Tracking-Configuration-Guide
We now also need the root cert for the BLE scanning.
So this works but the asset tracking doesnt.
We need to add the "wss endpoint" But does anyone know the EU server URL
(XXXXXX) [WiFi_Controllers] (config) #ble_relay mgmt-server type ws
<ws-endpoint> Endpoint URL or IP address
------------------------------
Thierry Lubbers
------------------------------