Hello professionals,
Has anyone encountered the following problem on Aruba 6100 switches?
I'm trying to copy running-config to my TFTP server.
I use CLI command (OS-CX PL.10.07.0005)
copy running-config tftp: //ip.of.my.pc/arubarunning.txt cli
Normally, the command output usually looks like this:
A610048G01 # copy running-config tftp: //ip.of.my.pc/arubarunning.txt cli
% Total% Received% Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 4853 0 0 100 4853 0 110k -: -: - -: -: - -: -: - 110k
100 4853 0 0 100 4853 0 107k -: -: - -: -: - -: -: - 107k
Copying configuration: [Success]
A610048G01 #
Then I have an arubarunning.txt file on my TFTP server.
But sometimes this happens:
A610048G02 # copy running-config tftp: //ip.of.my.pc/arubarunning.txt cli
curl: Can't open '/tmp/config/user/arubarunning.txt'!
curl: try 'curl --help' for more information
curl: (26) Failed to open / read local data from file / application
Copying configuration: [Failure]
error uploading running-config
A610048G02 #
I have found that the /user/ directory is missing (or not accessible) on the affected switches.
A610048G02 # start-shell
A610048G02: ~ $ cd /tmp/config/user
bash: cd: /tmp/config/user: No such file or directory
A610048G02: ~ $
Unfortunately, the only solution in such situations is always only a full restart, AFAIK.
Anyone some other ideas...?
Thank you
Best Regards
------------------------------
Radek Nekvinda
------------------------------