Hi
We have recently replaced our HP E8212zl with an Aruba 6405 running 10.06.0011 OS-CX. Since changing over our PXE booting to ECM to image PCs has stopped working. Our current setup is;
DHCP server 10.10.0.5
ECM server 10.10.0.10
3 VLANs
VLAN 110 Servers
VLAN 48 PCs
VLAN 80 PCs
6405-Core(config)# sho run int vlan 110
interface vlan110
description Servers
ip address 10.10.0.2/23
ip helper-address 10.10.0.5
ip forward-protocol udp 10.10.0.10 4011
6405-Core(config)# sho run int vlan 48
interface vlan48
description Admin
ip address 10.10.4.1/21
ip helper-address 10.10.0.5
ip forward-protocol udp 10.10.0.10 4011
6405-Core(config)# sho run int vlan 80
interface vlan80
description Students
ip address 10.10.8.1/21
ip helper-address 10.10.0.5
ip forward-protocol udp 10.10.0.10 4011
6405-Core(config)# ip udp-bcast-forward (has been enabled)
6405-Core(config)# sho ip forward-protocol udp
UDP Broadcast Forwarder : enabled
Interface: vlan110
IP Forward Addresses UDP Port
-------------------- --------
10.10.0.10 4011
Interface: vlan48
IP Forward Addresses UDP Port
-------------------- --------
10.10.0.10 4011
Interface: vlan80
IP Forward Addresses UDP Port
-------------------- --------
10.10.0.10 4011
Currently if we move a PC onto the server vlan (110) PXE booting works and we can image it. With PCs sitting on the correct VLANs (48 & 80) they fail to PXE boot.
Any assistance greatly appreciated as we have a delivery of PCs coming in early January.
------------------------------
Declan Whelan
------------------------------