Wired Intelligent Edge

 View Only
last person joined: yesterday 

Bring performance and reliability to your network with the Aruba Core, Aggregation, and Access layer switches. Discuss the latest features and functionality of the ArubaOS-Switch and ArubaOS-CX devices, and find ways to improve security across your network to bring together a mobile first solution.
Back to discussions
Expand all | Collapse all

How to rout between vlans in Aruba 2530-48G by web interface ?

This thread has been viewed 16 times

  • 1.  How to rout between vlans in Aruba 2530-48G by web interface ?

    Posted Sep 18, 2018 06:09 AM

    Hi all,

    I have 3 switchs Aruba 2530-48G and one router Dektec300B. I already tested creating some vlans and it is done. Now i want a vlan (belong to  a vlan)  to be able to access to another. How can i do that in webinterface (i am newbie so cannot use cli)?

    Thanks alot.



  • 2.  RE: How to rout between vlans in Aruba 2530-48G by web interface ?

    EMPLOYEE
    Posted Sep 18, 2018 06:38 PM

    Greetings!

     

    The 2530 is a Layer 2-only switch, and as such does not support inter-VLAN routing. You would need to tag the VLANs across the uplink to the router and configure it to perform any desired routing there.



  • 3.  RE: How to rout between vlans in Aruba 2530-48G by web interface ?

    Posted Jan 03, 2022 10:59 AM
    hello,

    I know this post was a few years ago, but since i don't know the hpe-2530 very well...I just posted a question at:  

    https://community.arubanetworks.com/community-home/digestviewer/viewthread?GroupId=61&MessageKey=8902f06f-8c01-4da4-93b4-66c6255051a3&CommunityKey=0e07426b-9490-40f0-bb66-f95a4b8a674f&tab=digestviewer&ReturnUrl=%2fcommunity-home%2fdigestviewer%3fcommunitykey%3d0e07426b-9490-40f0-bb66-f95a4b8a674f%26tab%3ddigestviewer


    Not sure if what you are saying here is what I have configured?  If so, I still can't get the inter vlan routing working?

    ------------------------------
    Ernest Grogg
    ------------------------------

    Original Message


  • 4.  RE: How to rout between vlans in Aruba 2530-48G by web interface ?

    MVP GURU
    Posted Jan 03, 2022 01:52 PM
    Hi Ernest, I tried to formulate an answer by replying on the linked thread. Just a note: the legacy HP ProCurve 2530 Switch series (or the current rebranded Aruba 2530 Switch series) doesn't support Layer 3 features...no IP routing. You can create VLAN (Layer 2) but the routing between them should be performed by an external/additional Layer 3 capable device (Switch/Firewall/Router/etc.).

    ------------------------------
    Davide Poletto
    ------------------------------

    Original Message


  • 5.  RE: How to rout between vlans in Aruba 2530-48G by web interface ?

    Posted Jan 03, 2022 02:27 PM
    Hello Sir,

    Our L3 device is the 7100 which is performing all the required IP functions.  Each Vlan is getting an IP except vLan 1 which was also set to DHCP.  I put all the info in the other post above.

    thanks for the thoughtful reply!  I truly appreciate it.

    ------------------------------
    Ernest Grogg
    ------------------------------

    Original Message