I have an aruba 2930F switch where I have created 3 vlan
I want vlan 2 and vlan 3 to have full input and output communication with these vlan 1 addresses (192.168.1.71 and 192.168.1.79)
can I know where the VLAN 2 & VLAN 3 gateway configured?
If the gateways are configured on the same switch then all end will communicate using local and direct routes from the gateway?
and if VLANs gateways are in different switches then required routing and ACL are required to configure.
At Aruba, we believe that the most dynamic customer experiences happen at the Edge. Our mission is to deliver innovative solutions that harness data at the Edge to drive powerful business outcomes.
© Copyright 2021 Hewlett Packard Enterprise Development LPAll Rights Reserved.