Wired Intelligent Edge

 View Only
last person joined: 2 days ago 

Bring performance and reliability to your network with the Aruba Core, Aggregation, and Access layer switches. Discuss the latest features and functionality of the ArubaOS-Switch and ArubaOS-CX devices, and find ways to improve security across your network to bring together a mobile first solution.
Expand all | Collapse all

2540G-POE PD error message for Access point

This thread has been viewed 110 times
  • 1.  2540G-POE PD error message for Access point

    Posted Jun 15, 2020 03:30 AM

    I faced the issue that access point went down with this message.

    I am not sure where is the root cause to make this error.

     

    PD stopped responding to LLDP PoE TLVs from PSE.
    Previous LLDP negotiated power values will be retained.

    port 1 is now on-line.

    port 1 is now off-line.

    port 1 is now on-line.

     

    Switch 2540G-POE

    Access Point 515(RW)


    Please help



  • 2.  RE: 2540G-POE PD error message for Access point

    MVP EXPERT
    Posted Jun 15, 2020 11:02 AM

    Did you see anything in the logs from the AP side when the issue occurred? Any warnings or similar mentioning LLDP or PoE?



  • 3.  RE: 2540G-POE PD error message for Access point

    Posted Feb 01, 2022 07:38 AM
    Hello Craig,
    I have same issue and getting error on switch port " PD stopped responding to LLDP PoE TLVs from PSE"
    What should I do ?

    ------------------------------
    Shivam Ojha
    ------------------------------



  • 4.  RE: 2540G-POE PD error message for Access point

    MVP GURU
    Posted Jun 16, 2020 02:49 AM

    What firmware on IAP and switch ?



  • 5.  RE: 2540G-POE PD error message for Access point

    EMPLOYEE
    Posted Jul 02, 2020 05:48 AM

    I'm seeing this log message on a 3810M with 315 and 535. I don't believe the AP is actually going down in my case.



  • 6.  RE: 2540G-POE PD error message for Access point

    MVP GURU
    Posted Jul 07, 2020 02:38 PM

    What sw firmware ?



  • 7.  RE: 2540G-POE PD error message for Access point

    Posted Aug 20, 2020 06:28 AM

    Hi,

     

    I am getting this issue too

     

    The switch im using is aruba 2930F WC.16.10.0009

     

     



  • 8.  RE: 2540G-POE PD error message for Access point

    Posted Aug 26, 2020 05:22 AM

    Hi i am getting the same massages:

     

    PD stopped responding to LLDP PoE TLVs from PSE. Previous LLDP negotiated power values will be retained.

     

    Using iAP305 with 2930F WC.16.10.0010