With any ArubaOS-Switch (such as the 2930F) you configure the untagged, tagged, excluded ports from the VLAN context and not the other way around.
Example:
vlan 13
name "Storage_replication"
untagged 1/23,2/23-2/24
tagged Trk1
no ip address
exit
------------------------------
I work for Aruba. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
------------------------------
Original Message:
Sent: Mar 05, 2021 09:21 AM
From: abdelakder kherrab
Subject: Config translation from Procurve 1800 1810 and 1820 To 2930F
Hello ,
I will replace some Old procurve switches 1800 1810 and 1820 by 2930F switches.
The old switches have only Web access (GUI interface). So I need to translate the Gui to CLI.
Could you please confirm / correct if the translation bellow are goode ?
Thank you
********** Switch 1800 ***********
int 9
untagged 40
!
int 10
untagged 1
!
int 13
tagged 80
!
int 21
tagged vlan 1,40,80
!
trunk 12,14 trk1 lacp
interface trk1
tagged vlan 1,40,80
************ Switch 1810 *******************
int 1-20,22-24
untagged 111
!
int 21,25
untagged 1
tagged 111
!
int 26
untagged 1
********* Switch 1820******************
int 1-4,6-7
untagged 1
!
int 5
untagged 104
!
int 8
untagged 1
tagged 8
!