Hello
i have a new Aruba JL558A 2930F-48G-740W-PoE+-4SFP+ Switch i want add it to my existing vsf stack, already add the member in my commander switch, and connect the new switch, the new swich detects de commander, it upgrades itself to the commander version, but after rebooting and running show vsf command, it appears as missing, running show vsf link detail show that the vsf is enable on the new switch but i enable it prior rebooting
here are the logs of the commands
VSF Domain ID : 1
MAC Address : xxxxxx-xxxxxx
VSF Topology : Chain
VSF Status : Fragment Active
Uptime : 99d 18h 16m
VSF MAD : None
VSF Port Speed : 10G
Software Version : WC.16.09.0003
Mbr
ID MAC Address Model Pri Status
--- ----------------- ------------------------------------- --- ---------------
1 548028-xxxxxx Aruba JL558A 2930F-48G-740W-PoE+-4... 128 Commander
2 3821c7-xxxxxxy Aruba JL558A 2930F-48G-740W-PoE+-4... 128 Standby
3 104f58-xxxxxz Aruba JL558A 2930F-48G-740W-PoE+-4... 128 Missing
show vsf link detail
VSF Member: 1 Link: 1
Port State
-------- ------------
1/49 Down
VSF Member: 1 Link: 2
Port State
-------- ------------
1/50 Up: Connected to port 2/49
VSF Member: 2 Link: 1
Port State
-------- ------------
2/50 Error: VSF disabled on peer with MAC 104f58-xxxxxz
VSF Member: 2 Link: 2
Port State
-------- ------------
2/49 Up: Connected to port 1/50
right now i cant enter the new switch, i have to factory reset it, when i do and connect de DAC cables, and detects a vsf connection, after rebooting displays the message "VSF configuration mismmatch...rebooting"
so any tips will be heavely appreciated
Thanks in advance
------------------------------
Mario Cardenas
------------------------------