there is no stack feature on 6100
------------------------------
PowerArubaSW : Powershell Module to use Aruba Switch API for Vlan, VlanPorts, LACP, LLDP...
PowerArubaCP: Powershell Module to use ClearPass API (create NAD, Guest...)
PowerArubaCX: Powershell Module to use ArubaCX API (get interface/vlan/ports info)..
ACEP / ACMX #107 / ACDX #1281
------------------------------
Original Message:
Sent: Feb 01, 2021 04:19 PM
From: Melvin Fleiser
Subject: 6100CX optic and DAC support
Hello Kamal, Are you able to state if stacking for 6100 will be supported in future software release please?
Original Message:
Sent: Jan 27, 2021 06:49 AM
From: Kamal Takodra
Subject: 6100CX optic and DAC support
No formal DAC support.
As no "stacking" for 6100.
You can try "unsupported transceiver mode" but that would come with the usual caveats
If its a must speak to your Aruba AM/SE whom can feed this back
------------------------------
Kamal Takodra
If my post was useful accept solution and/or give kudos
Original Message:
Sent: Jan 25, 2021 09:14 PM
From: george ferns
Subject: 6100CX optic and DAC support
Hi
Noticed in Iris and in the Datasheet that there are no supported DACS listed for the CX6100. Is this going to change? (I would have thought that it would support at least the 1 and 3 meter 10G Dacs.)
Cheers
G
------------------------------
George Ferns
Solution Architect
Ingram Micro
Auckland NZ
------------------------------