If we were to follow the analogy above,
should we also differentiate the MTU vs. IP MTU ?, in CX.
In the AOS,(eg.2930), the sh jumbos states:
Indicate a smaller difference of 18 bytes.
Hence, the fact there are no such command/setting in CX,
and settings is related to the physical interface[L2] and SVI[L3] ?
The CX states on a Physical interface:
The CX states on a SVI:
SW(config-if-vlan)# ip mtu
Anyone, please elaborate in the variance in the MTU/IP MTU
handling in the two OS.
(Seeing that there is no Max Frame Size setting in CX,
Although and the two "settings" MTU vs. IP MTU states same max-values,
but a minimum value at a smaller difference of 22 bytes)
At Aruba, we believe that the most dynamic customer experiences happen at the Edge. Our mission is to deliver innovative solutions that harness data at the Edge to drive powerful business outcomes.
© Copyright 2021 Hewlett Packard Enterprise Development LPAll Rights Reserved.