Goodnight
Can you please give me a brief explanation of how ospf works in aruba cx?
Since having the two nodes in VSX 8325 I understand that an adjacency between them must be created at the osfp level outside of production, I currently have this configuration in my HP5500 and I am validating which is the good practice for the migration to CX with VSX
Thanks for the help.
#
interface Vlan-interface555
ip address 10.1.55.1 255.255.255.240
ospf timer hello 5
ospf timer dead 20
ospf authentication-mode md5 1 cipher
#
ospf 10 router-id 111.111.111.111
default-route-advertise type 1
import-route direct type 1 route-policy RM-ADVERTISE-OSPF
import-route bgp route-policy TAG-BGP-TO-OSPF
area 0.0.0.0
authentication-mode md5
network 10.1.55.0 0.0.0.15
#
I also have a BGP protocol towards providers but that part is already working, the doubt is with OSPF how would the scheme go in these new SW
------------------------------
Sebastian Barreto
------------------------------