Hi guys!
We have an Alcatel-Lucent IP phone system (ugh!) hooked to our Aruba switches. Currently, they're set to Voice VLAN 2 and Data VLAN 1. This works fine.
However, we need to change Data VLAN to 3. I cannot figure out how to make this work.
I've set tagged VLAN to 2 and untagged VLAN to 3. The phone powers up and registers fine with the IP phone system on VLAN 2. It works fine. However, any PC plugged to the phone's LAN port doesn't work - the computer sends packets but never receives any in return.
If I plug the PC directly to the switchport, then it is placed on VLAN 3 and works perfectly fine.
What gives? I am at my wits end.
Thank you!
------------------------------
Ryan Sim
------------------------------