I have multiple JL255A (2930F) switches and a bunch of J9151E (10Gbps) transceivers.
The AOS-Switch and AOS-CX Transceiver Guide (Edition 10) tell me this combo should be supported. Unfortunately I can't get it working.
Tested with 4 different JL255A switches and 4x J9151E. Rebooted switches. Upgraded switches. Unplugged & re-plugged the SPF+. Nothing seems to help.
Cmd Info : show tech transceivers
transceivers
Transceiver Technical Information:
Port # | Type | Prod # | Serial # | Part #
-------+-----------+------------+------------------+----------
1/27 | ?? | ?? | unsupported |
1/28 | SFP+DA1 | J9281D | CN0AKS38ST | 8121-1300
2/27 | ?? | ?? | unsupported |
2/28 | SFP+DA1 | J9281D | CN0AKS38ST | 8121-1300
The following transceivers have extra information:
Port # Message
-------- -------------------------------------
Port 1/27 Unsupported Transceiver. (SelfTest Err#128000)
Check: www.hp.com/rnd/device_help/2_inform for more info.
Port 2/27 Unsupported Transceiver. (SelfTest Err#128000)
Check: www.hp.com/rnd/device_help/2_inform for more info.
That link in there
Only thing the log gives is this:
00371 FFI: ST1-CMDR: Port 2/27 self test failure ERR: 210907 15:05 00128000
allow-unsupported-transceiver
This command didn't help either.
So, what is there to conclude from this? With some luck that I am an idiot and missed something obvious? Please do tell! :)
That I have 4 transceivers and/or 4 switches that are defunkt?
That support for this combo is a printing error in the transceiver guide?
Anybody got any ideas?
------------------------------
Koen
------------------------------