Wired Intelligent Edge

 View Only
last person joined: yesterday 

Bring performance and reliability to your network with the HPE Aruba Networking Core, Aggregation, and Access layer switches. Discuss the latest features and functionality of your switching devices, and find ways to improve security across your network to bring together a mobile-first solution
Back to discussions
Expand all | Collapse all

Aruba OS to Aruba CX command conversion

This thread has been viewed 46 times

  • 1.  Aruba OS to Aruba CX command conversion

    Posted Dec 31, 2020 02:04 AM
    Is there any automatic tool to convert Aruba OS commands to Aruba CX commands?

    ------------------------------
    Ahmad Enaya
    ------------------------------


  • 2.  RE: Aruba OS to Aruba CX command conversion

    MVP GURU
    Posted Dec 31, 2020 12:17 PM
    Hello Ahmad,

    personally I'm not aware of any automatic tool that is able to convert ArubaOS-Switch grammar into ArubaOS-CX grammar.

    Question: were you referring to "ArubaOS-Switch" when you wrote "Aruba OS", isn't it? I really hope so because, in any case, a converter tool from "ArubaOS" of old Aruba Networks MAS switch series to ArubaOS-CX doesn't exist too (nor I'm aware of any ArubaOS to ArubaOS-CX grammars CLI reference guide to see if there are matching commands).

    Not all is lost, there is a nice ArubaOS-Switch to ArubaOS-CX CLI Reference Guide [*] that will help you to find matching commands (if they exists on both platforms).

    [*] Reference here.

    ------------------------------
    Davide Poletto
    ------------------------------

    Original Message


  • 3.  RE: Aruba OS to Aruba CX command conversion

    Posted Dec 31, 2020 01:29 PM
    most commands I need are not in this list

    ------------------------------
    Ahmad Enaya
    ------------------------------

    Original Message


  • 4.  RE: Aruba OS to Aruba CX command conversion

    MVP GURU
    Posted Jan 03, 2021 06:09 AM
    What command missing ?

    ------------------------------
    PowerArubaSW : Powershell Module to use Aruba Switch API for Vlan, VlanPorts, LACP, LLDP...

    PowerArubaCP: Powershell Module to use ClearPass API (create NAD, Guest...)

    PowerArubaCX: Powershell Module to use ArubaCX API (get interface/vlan/ports info)..

    ACEP / ACMX #107 / ACDX #1281
    ------------------------------

    Original Message


  • 5.  RE: Aruba OS to Aruba CX command conversion

    Posted Jan 04, 2021 02:19 PM
    I want to assign certain QoS parameters to voice VLAN. in Aruba-OS switches this was:

    vlan xxx
    qos priority 6 (or I may set it to 7)
    voice
    exit

    For Aruba CX switches, I prefer to assign voice to "strict queue 7"

    ------------------------------
    Ahmad Enaya
    ------------------------------

    Original Message