Hi Aahmad, please open a new topic
------------------------------
PowerArubaSW : Powershell Module to use Aruba Switch API for Vlan, VlanPorts, LACP, LLDP...
PowerArubaCP: Powershell Module to use ClearPass API (create NAD, Guest...)
PowerArubaCX: Powershell Module to use ArubaCX API (get interface/vlan/ports info)..
ACEP / ACMX #107 / ACDX #1281
------------------------------
Original Message:
Sent: May 25, 2021 02:17 PM
From: Adnan Khan
Subject: Aruba CX 6100, changing default VLAN and assigning IP address via DHCP?
How I can created DHCP pool and excluded ip address in HP Aruba 8320 switch. ?
------------------------------
Adnan Khan
Original Message:
Sent: May 25, 2021 01:45 PM
From: Veli-Matti Junkkari
Subject: Aruba CX 6100, changing default VLAN and assigning IP address via DHCP?
Hi folks!
Aruba CX 6100, running 10.07.0005. I currently have DHCP enabled on VLAN=1 which is the default. I have a need to change this to VLAN=2 and get addressing via DHCP. But it seems the switch doesn't allow me to do it:
6100(config)# int vlan 2
6100(config-if-vlan)# ip dhcp
"ip dhcp" is supported only on default vlan (vlan1)
6100(config-if-vlan)#
I have been looking at the documentation and found this:
Is this really the case; so you're stuck with VLAN=1 in case you'd like to use DHCP for VLAN addressing?
------------------------------
gone fishing.
------------------------------