Hi ariyap,
thanks for your hint with Clearpass.
I'm well aware that webauth is possible with that.
In that specific case we want it to work without any sperate service like with the old switches I mentioned.
There we only have a webserver hosting the ewa page.
Kind regards,
Adrian
Adrian Nöthlich
Trainee Fachinformatiker Systemintegration
CANCOM GmbH |
Sitz der Gesellschaft: Jettingen-Scheppach |
HRB 10653 Memmingen |
Geschäftsführer: Rüdiger Rath (Vorsitzender), Paul Holdschik, Tobias Hörmann |
Diese E-Mail und alle mit gesendeten Dateien sind vertraulich und ausschließlich für den Gebrauch durch den Empfänger bestimmt! This e-mail and any files transmitted with it are confidential intended solely for the use of the addressee! |

Original Message:
Sent: 5/13/2022 7:12:00 PM
From: ariyap
Subject: RE: 802.1X Web-based authentication on CX
yes that is available, the last chapter on this technote is for CX switches.
https://support.hpe.com/hpesc/public/docDisplay?docId=a00091135en_us
------------------------------
Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba.
------------------------------
Original Message:
Sent: May 11, 2022 03:09 PM
From: Adrian Noethlich
Subject: 802.1X Web-based authentication on CX
Hi there,
we are currently migrating a location from HP Procurve Switches to Aruba CX.
Currently we use the web based authentication feature of those switches (see HP Switch Software Access Security Guide RA.15.18)
Is there anything like that we could use on CX?
Thanks in advance!
Adrian
------------------------------
Adrian Noethlich
------------------------------