Hi ,
Thanks for reply
I tried to save , it got error message.
Copying configuration: [Failure]
failed to update checkpoint startup-config
These are pair of switches form VSF stacking. the syslog error message mentioned the hardware error on
module 1/1.Does it mean the switch 1(master) of the VSF stack had hardware problem and just need to replce the switch 1(master) only.
# show vsf
MAC Address : b8:d4:xxxxxx
Secondary : 2
Topology : Chain
Status : No Split
Split Detection Method : None
Mbr Mac Address type Status
ID
--- ------------------- -------------- ---------------
1 b8:d4:e7:xxxx JL727A Master
2 b8:d4:e7:xxxxx JL727A Standby
------------------------------
Choh Koon Tan
------------------------------
Original Message:
Sent: Jan 05, 2022 03:39 AM
From: Stanislav Naydenov
Subject: Aruba 6200F - Warning Messages
Hi Choh,
It looks like a possible HW problem to me. Are you able to write on the flash of the switch (emmc card is used for this switch model) - saving configs, transferring files etc.?
I will advise you to open a case with Aruba, so the support will check the device for you and will help you further.
------------------------------
Stanislav Naydenov
Original Message:
Sent: Jan 05, 2022 03:12 AM
From: Choh Koon Tan
Subject: Aruba 6200F - Warning Messages
Hi all,
The syslog server received the following warning messages from this Aruba 6200F switch.
Please help explain what this message mean and issue the switch have.
thanks
Device Event Event Type is Syslog and Syslog Category is Hardware (more >) hostname-xxxxx 1/5/2022 3:53 PM +08 Warning 1 2022-01-05T15:47:42.271864+08:00 hostname-xxxxx hhmd 708 - - Event|3001|LOG_ERR|MSTR|1|Diagnostic emmc failed with error code 0x80000001 on maPostnagement module 1/1
------------------------------
Choh Koon Tan
------------------------------