Hi Everyone,
I'm new here and currently I'm studying LACP as the company I'm working for is using HPE Aruba switches.
So I found out that there's a slight difference on how the terms are different between HPE and CIsco network devices so
I'm watching this tutorial and I'm a bit confused. Feel free to read my notes below:
"Here port 45 and 46 was assigned to Trk1 using lacp protocol"
trunk 45-46 trk1 lacp
"Here port 47 and 48 was assigned to Trk2 using lacp protocol"
trunk 47-48 trk2 lacp
"Here's where I got confused. As I know you can only assigned a port to a vlan and declare if it was tagged or untagged.
Can you also do it with a trunk? And how is the tagged and untagged trunk different?
vlan 100 untagged Trk1
vlan 100 untagged Trk2
vlan 200 tagged Trk1
vlan 210 tagged Trk1
vlan 210 tagged Trk2
vlan 400 tagged Trk2
Feel free to post your comments and suggestions, thank you.