Fault monitoring profile
Yes, AOS-CX does support error disable auto-recovery. On AOS-CX it is called fault monitoring recovery.
say on cisco:
errdisable recovery cause all
errdisable flap-setting cause link-flap max-flaps 4 time 30
errdisable recovery interval 600
no errdisable recovery cause bpduguard
On AOS-CX
config-fault-monitor-profile <name>
all action notify-and-disable auto-enable 600
excessive-link-flaps action notify-and-disable auto-enable 600
spanning-tree bpdu-guard timeout <INTERVAL> Then apply on to interface as below:
switch(config)# interface 1/1/1
switch(config-if)# apply fault-monitor profile <name>
more details refer to our switching documentation:
Document Display | HPE Support Center Good day!
------------------------------
Yash NN
------------------------------