View Only
last person joined: yesterday 

Expand all | Collapse all

Ansible for InstantAPs

This thread has been viewed 28 times
  • 1.  Ansible for InstantAPs

    Posted May 14, 2019 01:08 AM

    Hey all,


    Fairly new to HP gear so I'm not 100% I'm even using the right terms for OSes etc, but hopefully this makes sense.


    I've been playing with Ansible a (very) little, and was going to try and use it to update the firmware for some InstantAPs (the 315 model if it matters)

    Trying to connect to the devices using aruba_config or aruba_command modules gets me an error 'unable to set terminal parameters', while trying to use the arubaoss modules returns 'No JSON object could be decoded'

    I don't think what I'm doing is actually supported as everything mentions aruba switch, not aruba ap but I was looking for any assistance or pointers in the right direction to see what I can do to automate the firmware upgrades on these APs.


  • 2.  RE: Ansible for InstantAPs

    Posted May 14, 2019 05:27 AM



    the ansible module is only (for the moment...) for Switch (Aruba / Ex Procuvre and ArubaCX).


    With new release of IAP (8.5), there is now API... may be it will be a a ansible module later...

  • 3.  RE: Ansible for InstantAPs

    Posted Aug 12, 2021 11:33 PM

    Is there any update regarding an Ansible module for IAP? Our organization would greatly benefit from such a module.

    Revie Gill

  • 4.  RE: Ansible for InstantAPs

    Posted Aug 18, 2021 03:16 PM
    No news about a Ansible module for IAP

    PowerArubaSW : Powershell Module to use Aruba Switch API for Vlan, VlanPorts, LACP, LLDP...

    PowerArubaCP: Powershell Module to use ClearPass API (create NAD, Guest...)

    PowerArubaCL: Powershell Module to use Aruba Central

    PowerArubaCX: Powershell Module to use ArubaCX API (get interface/vlan/ports info)..

    ACEP / ACMX #107 / ACDX #1281