I need an advice with HPE 5130EI switch and multiple VLAN (tagged and untagged) enforcement from ClearPass. On ArubaOS switches it is working well with Attribute HPE-Egress-VLAN-Name/ID but I cant find anything like this for Comware (H3C) switches.
Is there any solution for this ?
I have to do mac authentication with profiling and when the device is categorised as Access Point then assign correct VLANs.
maybe my problem has another solution and I will not need to assign multiple VLANs from ClearPass. Is it possible to set the VLANs staticaly on port (1 tagged and 1 untagged) and if the device will be profiled as Access point then assign there Allow Access enf. profile? And if not, ClearPass will send there some quarantine VLAN.
Is there available anything like HPE-Port-MA-Port-Mode for Comware switches ? Or how to achieve same result ?
Thanks and best regards
t for tagged vlans
u for untagged vlan
did you manage to achieve the port-mode on the comware 7 switch so?
At Aruba, we believe that the most dynamic customer experiences happen at the Edge. Our mission is to deliver innovative solutions that harness data at the Edge to drive powerful business outcomes.
© Copyright 2021 Hewlett Packard Enterprise Development LPAll Rights Reserved.