AOS-CX Switch Simulator

 View Only
last person joined: yesterday 

Expand all | Collapse all

Aruba NetEdit - EVE NG

This thread has been viewed 31 times
  • 1.  Aruba NetEdit - EVE NG

    EMPLOYEE
    Posted Apr 05, 2022 07:13 AM
    Hello
    Hello

    I need to install Aruba Net Edit in EVE NG but unfortunately I have not found enough information or a clear guide that I can use to do it.

    I would really appreciate if some can provide me some information, may be a clear guide or link that I can use to complete the installation

    I really appreciate any help you can provide me.

    Thank you

    I need to install Aruba Net Edit in EVE NG but unfortunately I have not found enough information or a clear guide that I can use to do it.

    I would really appreciate if some can provide me some information, may be a clear guide or link that I can use to complete the installation

    I really appreciate any help you can provide me.

    Thank you

    Rigo

    ------------------------------
    Rigoberto Villalobos
    ------------------------------


  • 2.  RE: Aruba NetEdit - EVE NG

    Posted Apr 06, 2022 02:08 AM
    From your post I conduct that you already have an EVE-NG environment up and running. So for the reference, here is the link how to setup the environment.

    To install NetEdit under the EVE-NG environment, you  need to convert .vhdx distribution file to .qcow2 file and create a simulator.

    Steps are the same as for linux machine on EVE-NG.

    # /opt/qemu/bin/qemu-img convert -f vhdx -O qcow2 Aruba_NetEdit-2.3.0.vhdx hda.qcow2
    # mkdir /opt/unetlab/addons/qemu/linux-NetEdit-2.3.0
    # mv hda.qcow2 /opt/unetlab/addons/qemu/linux-NetEdit-2.3.0/
    # /opt/unetlab/wrappers/unl_wrapper -a fixpermissions
    ​

    Hope this helps, Gorazd

    ------------------------------
    Gorazd Kikelj
    ------------------------------



  • 3.  RE: Aruba NetEdit - EVE NG

    Posted Apr 06, 2022 05:21 AM
    Hi, here is a good blogpost on aruba-stuff-in-eve-ng

    In my lab I'm running the NetEdit outside of EVE-NG. I connect a "OOB-GW" to my lan and "inside of OOB-GW" is connected to mgmt interfaces. I'm using OSPF for the management networks and have different prefixes for each lab. This way it's easy to share tftp, dhcp, monitoring, NetEdit, Aruba Fabric Composer, ansible etc. between labs.


    Sample lab EVE-NG



    ------------------------------
    Arne Opdal
    ------------------------------