Network Management

 View Only
last person joined: yesterday 

Keep an informative eye on your network with HPE Aruba Networking network management solutions
Back to discussions
Expand all | Collapse all

Network Time Configuration via WebGUI

This thread has been viewed 7 times

  • 1.  Network Time Configuration via WebGUI

    Posted Apr 29, 2021 01:58 PM
    Hi all,

    I am new at this platform and start working with Aruba switches some months ago. As I worked with Cisco before, I have several questionmarks in my brain missing some basic things in the WebGUI.

    Currently I have 2930F switches here and I would like to configure the Date and Time values, or the NTP values or even have a look at the current date and time  of the switch. I can't see anything of it except the uptime in the WebGUI. 

    It is not the issue to configure it via CLI, but I expect this kind of configuraton possibilities also via the WebGUI. 

    Am I not able to find it, or is it really missing ??

    Kind regards from Germany 
    Michael


    ------------------------------
    Michael Rabas
    ------------------------------


  • 2.  RE: Network Time Configuration via WebGUI

    MVP GURU
    Posted Apr 29, 2021 02:47 PM
    No. Not in the WebGUI. You would do this at the CLI level.

    ------------------------------
    Dustin Burns

    If my post was useful accept solution and/or give kudos
    ------------------------------

    Original Message