Network Management

 View Only
last person joined: 2 days ago 

Keep an informative eye on your network with IMC and AirWave network management solutions.
Expand all | Collapse all

Aruba CX6000 Switch - IP Helper Address

Jump to Best Answer
This thread has been viewed 10 times
  • 1.  Aruba CX6000 Switch - IP Helper Address

    Posted Apr 07, 2022 08:27 AM
    Hi,

    we have bought a CX6000 Switch and want configure the ip-helper addresses.
    But the CLI command for the ip-helper doesn't exists, is it not possible to configure this on the CX6000 Switch?

    Thank you for your help and kind regards
    Karl

    ------------------------------
    Karl Winkler
    ------------------------------


  • 2.  RE: Aruba CX6000 Switch - IP Helper Address
    Best Answer

    MVP GURU
    Posted Apr 07, 2022 03:59 PM
    I don't believe it is an option on the 4100i, 6000, and 6100 series.

    The proper CX syntax for the IP helper is below. If you do not see the options to set these, then it would be a limitation of the switch series. You may have to be at least on the 6200 series or higher for the DHCP relay service:

    interface <vlan/interface>
    ip address xxx.xxx.xxx.xxx/xx
    ip helper-address xxx.xxx.xxx.xxx
    exit


    ------------------------------
    Dustin Burns

    Lead Mobility Engineer @Worldcom Exchange, Inc.

    ACCX 1271| ACMX 509| ACSP | ACDA | MVP Guru 2022
    If my post was useful accept solution and/or give kudos
    ------------------------------