Network Management

 View Only
last person joined: 9 hours ago 

Keep an informative eye on your network with HPE Aruba Networking network management solutions
Back to discussions
Expand all | Collapse all

Network Time Configuration via WebGUI

This thread has been viewed 7 times

  • 1.  Network Time Configuration via WebGUI

    Posted Apr 29, 2021 01:58 PM
    Hi all,

    I am new to the Aruba switch stuff, as I worked with CISCO before, and I start to get some questionmarks in my brain.
    I have 2930F switches in front of me and I am struggeling with the basic configuration things at the WebGUI. 
    I am not able to configure "date and time" nor NTP values or even see the current dat and time via the WebGUI? The only value I can see is the uptime?

    Am I to blind to see it, or is it really not possible? I am not asking how to do it, via CLI it is no issue, but this basic configuration tasks should be also possible via the WebGUI.

    Does someone has a hint for me? 

    Kind regards..

    ------------------------------
    Michael
    ------------------------------


  • 2.  RE: Network Time Configuration via WebGUI

    MVP GURU
    Posted Apr 29, 2021 02:43 PM
    No. Not in the WebGUI. You would do this at the CLI level.

    ------------------------------
    Dustin Burns

    If my post was useful accept solution and/or give kudos
    ------------------------------

    Original Message