weg got a a new Switch but i never worked wit any HP Product so i got some Problems.
But first of all whats the Target:
We have 2 Routers
then the HPE Switch
Now i want the Switch to be in both Routers so he has the connection to both internetconnections.
Then he have to gave the Clients his own IP-Range so lets say it has to be 18.104.22.168 for the Switch himself and 22.214.171.124-200 for the Clients on him.
If Router1 lost his Internetconnection the Switch goes over Router2 in the internet and the same on the other direction.A Simple Failover for the Internetconnection if u want so.
And the Last think it should be Load Balancing between Router1 and Router2 if both are online and connected to the Internet.
Can anyone help me pls with that i only used Cisco in my life so far and i rly see just woods in the HPW Web Interface^^
At Aruba, we believe that the most dynamic customer experiences happen at the Edge. Our mission is to deliver innovative solutions that harness data at the Edge to drive powerful business outcomes.
© Copyright 2021 Hewlett Packard Enterprise Development LPAll Rights Reserved.