Network Management

 View Only
last person joined: yesterday 

Keep an informative eye on your network with IMC and AirWave network management solutions.

vsf two members

This thread has been viewed 4 times
  • 1.  vsf two members

    Posted Apr 06, 2022 09:54 AM
    Hello,
    When creating a VSF with only two members, but joined with two DAC cables between them, is it correct that in the configuration it indicates that one of the links is down?

    ARUBA-SW# sh vsf link

      VSF Member 1

                       Link     Peer   Peer

     Link Link-Name   State    Member Link

     ---- ---------- -------- ------ ----

     1    I-Link1_1   Up       2      1

     2    I-Link1_2   Down     0      0

      VSF Member 2

                       Link     Peer   Peer

     Link Link-Name   State    Member Link

     ---- ---------- -------- ------ ----

     1    I-Link2_1   Up       1      1

     2    I-Link2_2   Down     0      0


    Instead, the ports are up:

    ARUBA-SW# sh vsf link detail

      VSF Member: 1     Link: 1

      Port     State

     -------- ------------

     1/49     Up: Connected to port 2/50

     1/50     Up: Connected to port 2/49


      VSF Member: 2     Link: 1

      Port     State

     -------- ------------

     2/49     Up: Connected to port 1/50

     2/50     Up: Connected to port 1/49


    It also indicates that the topology is chain, instead of ring.

    VSF Topology     : Chain

    ARUBA-SW# sh vsf topo

      VSF member's interconnection with links:

      Stby     Cmdr

     +---+    +---+

     | 2 |1==1| 1 |

     +---+    +---+


    Thank you very much.

    ------------------------------
    Nacho Marin
    ------------------------------