Network Management

 View Only
last person joined: yesterday 

Keep an informative eye on your network with HPE Aruba Networking network management solutions
Expand all | Collapse all

Airwave can saw configuration change on MM or MC

This thread has been viewed 14 times
  • 1.  Airwave can saw configuration change on MM or MC

    Posted Jun 04, 2021 04:12 AM
    Dear all
    I would like to find configuration change on MM and MC in the past like a someone change configuration on MM and MC
    Can The Airwave see it ?

    ------------------------------
    jakkapan meeon
    ------------------------------


  • 2.  RE: Airwave can saw configuration change on MM or MC

    MVP GURU
    Posted Jun 04, 2021 06:35 AM
    Have you tried running the "show audit-trail history" command. Is that giving you enough information on configuration changes?

    ------------------------------
    Dustin Burns
    Senior Mobility and Access Engineer @WEI

    ACCX 1271| ACMX 509| ACSP | ACDA | MVP Guru 2021
    If my post was useful accept solution and/or give kudos
    ------------------------------



  • 3.  RE: Airwave can saw configuration change on MM or MC

    Posted Jun 04, 2021 06:57 AM
    Hi Dustin
    I will try this command 
    thank you for information

    ------------------------------
    jakkapan meeon
    ------------------------------



  • 4.  RE: Airwave can saw configuration change on MM or MC

    Posted Jun 05, 2021 04:54 AM
    Hi Dustim
    I did show command it show last configuration change but configuration some it lost 

    This log show only 23 MAY to present
    But i need look configuration on 20-22  MAY 
    Do you have any idea ?
    Thank you

    ------------------------------
    jakkapan meeon
    ------------------------------



  • 5.  RE: Airwave can saw configuration change on MM or MC

    MVP GURU
    Posted Jun 07, 2021 08:43 AM
    Did the device reboot around the time your logs stop (May 23rd) ? If a device reboots you wont see this. If the changes were made via the Mobility Master, and that has been up longer, you may be able to see it there. Change Directory to the folder the Controller is in and run it, and also change directory to the controller level and run it. You may find something there.

    Do you use TACACS+ for your access to the devices? You may have logs on the TACACS+ server for the sessions.

    ------------------------------
    Dustin Burns
    Senior Mobility and Access Engineer @WEI

    ACCX 1271| ACMX 509| ACSP | ACDA | MVP Guru 2021
    If my post was useful accept solution and/or give kudos
    ------------------------------