Network Management

 View Only
last person joined: 2 days ago 

Keep an informative eye on your network with IMC and AirWave network management solutions.
Expand all | Collapse all

airwave mismatch cert-psk

Jump to Best Answer
This thread has been viewed 18 times
  • 1.  airwave mismatch cert-psk

    Posted Jan 13, 2022 01:11 PM
    Hi,

    i've upgraded some iap's from 6.5.2 to 6.5.4 and now get a mismatch in the config.  The mismatch is : 

    cert-psk xxxxxxxx

    Performing 'apply-all' to the mismatch does not solve anything.  The mismatch just returns.

    I've logged into one iap and executed the 'cert-psk' command.  And am getting a parse error.  So i suspect this command no longer exists in 6.5.4.
    The question is where is this coming from?  And how to get rid of it?


  • 2.  RE: airwave mismatch cert-psk

    MVP GURU
    Posted Jan 13, 2022 02:26 PM
    What Airwave release ?

    ------------------------------
    PowerArubaSW : Powershell Module to use Aruba Switch API for Vlan, VlanPorts, LACP, LLDP...

    PowerArubaCP: Powershell Module to use ClearPass API (create NAD, Guest...)

    PowerArubaCL: Powershell Module to use Aruba Central

    PowerArubaCX: Powershell Module to use ArubaCX API (get interface/vlan/ports info)..

    ACEP / ACMX #107 / ACDX #1281
    ------------------------------



  • 3.  RE: airwave mismatch cert-psk

    Posted Jan 14, 2022 02:49 AM
    8.2.13.0

    ------------------------------
    Peter Nobels
    ------------------------------



  • 4.  RE: airwave mismatch cert-psk
    Best Answer

    Posted Jan 14, 2022 04:37 AM
    i was able to reproduce this in a lab setup...
    The cert-psk comes with an installed cert.  The cert itself was expired.  Not sure if the issue comes from that fact.  But once i pointed the group to a valid cert the mismatch was resolved.






  • 5.  RE: airwave mismatch cert-psk

    MVP GURU
    Posted Jan 14, 2022 06:51 AM
    Yes, Airwave can't install an expired certificate...

    ------------------------------
    PowerArubaSW : Powershell Module to use Aruba Switch API for Vlan, VlanPorts, LACP, LLDP...

    PowerArubaCP: Powershell Module to use ClearPass API (create NAD, Guest...)

    PowerArubaCL: Powershell Module to use Aruba Central

    PowerArubaCX: Powershell Module to use ArubaCX API (get interface/vlan/ports info)..

    ACEP / ACMX #107 / ACDX #1281
    ------------------------------