Cloud Managed Networks

 View Only
last person joined: yesterday 

Forum to discuss all things related to HPE Aruba Networking Central and UXI Network Management, including deployment of managed networks, configuration, best practices, APIs, Cloud Guest, AIOps, Presence Analytics, and other included Applications
Back to discussions
Expand all | Collapse all

ArubaOS-CX and Aruba Central

This thread has been viewed 27 times

  • 1.  ArubaOS-CX and Aruba Central

    Posted Feb 16, 2021 10:12 AM
      |   view attached

    Good morning,

    I have two questions about the Aruba central with Arubaos-CX.

    Context: I have two switches in VSX in a production environment in a Datacenter, I need to add to Aruba central portal, and these switches I want to be administrated from Aruba Central.

    1. What is the best way to add these switches to Aruba Central Group without change or erase the configuration? What kind of group do I need to use?
    2. Can I add these switches to the same group without has any problem with the VSX configuration? If I put two switches with VSX in the same group, have any issues?
    At this moment I just add the switches to Aruba Central but I can not do anything, and the platform doesn´t show all switches information.

    ------------------------------
    Mauricio Pacheco
    ------------------------------

    Attachment(s)

    docx
    Error Aruba Central.docx   1.25 MB 1 version


  • 2.  RE: ArubaOS-CX and Aruba Central

    EMPLOYEE
    Posted Feb 18, 2021 10:27 PM
    CX is only supported with templates.  It's hard to tell from your photos if you created a Template Group and imported the switches into it.

    Please read the notes at the top of this page:
    https://help.central.arubanetworks.com/2.5.2/documentation/online_help/content/switches/cx/switch-cx-vsx.htm

    Also read what is supported:
    https://help.central.arubanetworks.com/2.5.2/documentation/online_help/content/switches/supported-platforms/supported-switches-cx.htm

    Note the CX limitations, especially with VSX:
    https://help.central.arubanetworks.com/2.5.2/documentation/online_help/content/switches/cx/cx-limitations.htm

    Then follow the steps here:
    https://help.central.arubanetworks.com/2.5.2/documentation/online_help/content/switches/cx/prov-tmplt-prcnf-cx.htm

    You may only need to add the switched to a group, just make sure it's a Template Group.  But I cannot tell where you are having the issue from the info provided.

    ------------------------------
    Jon W
    ------------------------------

    Original Message