configuring syslog for LAN switches is supported in the template groups not webUI.
------------------------------
Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba.
------------------------------
Original Message:
Sent: Feb 19, 2021 07:16 AM
From: Keith Dinser
Subject: Syslog Server
I think I'm going to have to move the switches over to template groups to get that functionality. Any reference to syslog in the Aruba Central docs involves AP's
Original Message:
Sent: Feb 18, 2021 10:21 PM
From: Juan Jose Perez Avila
Subject: Syslog Server
Hi,
Same question here! Where can we define an external syslog server IP for Aruba switches in Central? All I have found is related to APs and Gateways but nothing for switches. Any help will be highly appreciated.
------------------------------
Juan Jose Perez Avila
Original Message:
Sent: Feb 02, 2021 05:05 AM
From: Jamie Hopper
Subject: Syslog Server
no, it is not there for switches. does anyone know if it's even possible to configure a syslog server via aruba central for SWITCHES ?
------------------------------
Jamie Hopper
Original Message:
Sent: Jan 28, 2021 11:01 AM
From: harendra nishshanka
Subject: Syslog Server
Only access points, for switches you need to configure under switch tab
Original Message:
Sent: 1/28/2021 10:52:00 AM
From: kmdcompelect
Subject: RE: Syslog Server
Does that setting affect switches or just access points?
Original Message:
Sent: Jan 28, 2021 01:53 AM
From: harendra nishshanka
Subject: Syslog Server
1. goto your group in hierachy
2. select "Devices" and goto "System" tab
3. click on configuration and enable " show advanced"
4. scroll down and you will find "Logging"
------------------------------
Harendra
ACDX#1129|ACEP|CWSP|CWNA|CCNA
Original Message:
Sent: Jan 27, 2021 08:28 AM
From: Keith Dinser
Subject: Syslog Server
Hello, I'm fairly new to Aruba Central and I'm struggling with getting a few things working correctly. We have 10 x 2540 switches managed using 2 UI groups currently for 2 sites.
Where I can I setup the info for a syslog server? I've seen some documentation that says to use the logging command in the CLI, but that command doesn't seem to be available in my switches and I can't find it in AC either.