I have HP 2610 and 2530 POE switches to which I connect my aps (AP 135, AP 105, AP 205).
Looking at the logs i see a lot of the following messages regarding the ports to which aps are connected:
W 07/23/15 15:32:47 00327 FFI: port 4-Excessive undersized/giant packets. See help.
W 07/23/15 15:32:27 00327 FFI: port 3-Excessive undersized/giant packets. See help.
The MTU size is set to "" in SAP MTU, so it should be set automatically.
Why I got those messages?
What can I do?
Have you seen the article here? http://community.arubanetworks.com/t5/Controller-Based-WLANs/ArubaOS-AP-MTU-Support/ta-p/178128
Yes, I had read the article, but didn't read the link posted below
so setting the MTU size to 1500 is in this case a best practice, did I understood it correctly?
Yes, if you set the AP MTU to 1500, it should solve the problem.
Hi.I cannot find any MTU settings in Aruba central? (Checked under Access point (tab) -> config -> System (tab) and wish "show advanced").Could you please provide a screenshot or a more exact description of where/how this setting is accessed/modified?
(funny thing is I'm 99.9% sure I've seen MTU during setups lots of times so I'm wondering if it's been removed in newer versions of central)
At Aruba, we believe that the most dynamic customer experiences happen at the Edge. Our mission is to deliver innovative solutions that harness data at the Edge to drive powerful business outcomes.
© Copyright 2021 Hewlett Packard Enterprise Development LPAll Rights Reserved.